Surefire Scout Tailcap & Tape Switch Product Guide – Big Tex Outdoors
Orders ship in 24 hours or less.
Cart 0

Surefire Scout Tailcap & Tape Switch Product Guide

Ike Stephens

A question we frequently see is what Surefire Scout tape switches will work with which lights and what advantages there are for each. This post will help you decide which assembly may work best for your needs and should give you a better understanding of all  the options out there. If you have any other questions or need clarification, please feel free to reach out to us. Ike@BigTexOutdoors.com


A DS-SR07 assembly on the M600DF Scout and Cloud Defensive mount

 

 


 
 Save 15% with the code SWITCH

Compatibility

This part is easy. Right now, every surefire scout tailcap and tape switch combo will work with every Surefire Scout. This includes the M300, M600U, M300V, M600V & the M600DF. They’re 100 % interchangeable as far as tailcaps and switches are concerned.

It is important to note that head on the M600DF is larger and will not work on the previous generations of Scout lights.

If you have the older Millennium Series (M951, M961 etc) of Surefire weapon lights the tailcaps will be a different size from the Scout series of lights. The tape switches will be interchangeable but the tailcaps will not work. (These lights require the XM tailcap covered near the end of this article.)


The Surefire M952 light with XM07 tailcap and IR filter.

 

Tape Switch Comparison

First let’s discuss the tape switch options. You can buy the tailcaps and switches by themselves or as a combo (which we will cover later) but for now we’ll isolate the caps and switches so you can know what each does. Right now there’s currently (3) tape switch styles in production.

  • ST series
  • SR Series 
  • SR-D-IT Series

The ST tape switches are available in several lengths with the most popular one being 7 inches. This is a single function tape switch that is momentary  only. The latest version has some improvements over the older model which include reinforcement where the cable meets the pad and pronounced edge around the pad itself. This makes the switch more reliable and extends the life.

These switches need to be secured to the rail by a mount like one from Cloud Defensive or Magpul. You can also secure it using velcro, tape or rubber bands but these are less permanent and less reliable methods.


The ST07 (with UE tailcap) in a Cloud Defensive LCS Mount. (Surefire M300  pictured)



The ST07 installed with velcro. Photo courtesy of Parker Mountain Machine



Surefire ST07 switch

 


An example of the early generation ST switch


Next is the SR series of tape switches which are extremely popular and regarded by most to be the best option currently out there. It offers the momentary activation pad and also provides a constant on button at the front of the unit. The user can easily switch between the two at will. The SR pads are available in several lengths too with the most common being 7 inches.

Another great feature of the SR tape switch is the built in picatinny mount. This rail grabber mount will allow you to mount the switch to any picatinny rail without the need for any aftermarket mounts or products. It also has built in channels for zip ties if you want to secure it further but the built in system is very secure.

If you want to make absolutely sure it doesn’t go anywhere there is a modification that allows you to use the Cloud Defensive LCS but it will most likely void the warranty on your tape switch. You can read about it HERE.



 
The Surefire SR07 Tape Switch


The SR07 in a Cloud Defensive LCS Mount. Click HERE for steps on how to preform this modification

 

 

 

Last is the SR-D-IT series. These are for use with DBAL or ATPIAL lasers and allow you to activate both your light and the laser from one switch. The switch has two separate pads mounted in-line with each other and they are both momentary only. They have the built in rail mount like the SR series and won’t require any aftermarket product to use on a rail.


The Surefire SR-D-IT tape switch installed on a rail.


Surefire SR-D-IT



Tailcaps



For tailcaps you basically have two options. The first is the UE tailcap which replaces the z68 tailcap (clicky) included with the Scout series of lights. It will allow you to use a tape switch and is available in both black and tan.


The Surefire UE tailcap. Available in both black and tan.

 


The UE tailcap on a M600DF Scout. (Kinetic Development Group mount and Railscales G10 scales and Karve handstop.

 


The other option is the DS tailcap which is dual function. This one has a clicky tailcap and also a plug to accept tape switches. The cap is a two piece, waterproof design that allows you to rotate the cap to get the perfect position for the cap. It’s very similar to the XM tailcap found on the Millennium series of weaponlights.

 
The DS tailcap with a modified SR07 tape switch in a Cloud Defensive mount

 


The DS tailcap also allows you to use the light without a tape switch



Factory Configurations

Now that we’ve established the different tailcaps and switches, we’ll take a look at the different combinations that Surefire offers. Buying the combos will save you money versus buying the parts individually.


UE07 ($79.00) This combo includes the UE tailcap and the ST07 tape switch.


UE-SR07  ($129.00) The most popular setup since it is comparatively inexpensive and gives you the SR07 switch. It’s also available in Tan so you can color match to your Tan Scout.



DS07 ($149.00) This includes the DS (dual function tailcap) and the momentary only ST07 switch.



DS-SR07 ($169.00) This provides you with the dual function tailcap and the dual function SR07 switch.\


DS-SR07-D-IT  ($199.00) This includes the dual function tailcap and the light/ laser tape switch.



You can also purchase the components individually as well as other lengths than the standard 7” cable. We have the 9" SR-D-IT tape switch  as well as the 9" SR09 tape switch available.

 

 

 

Tailcaps & Switches for 1" Body Lights

If you choose to, there is a way to use a tape switch on your 1" body Surefire handheld light. In the past this was a great way to get a 1,000 lumen light on your rifle (Surefire P3X). 

The XM tailcap (originally designed for the Millennium series of lights) will fit any 1" body Surefire. This includes:

Unfortunately they will NOT fit the new Fury DFT since the body is slightly larger due to the 18650 compatibility. 

The XM07 assembly is available on our site and it's fairly easy to find the XM tailcaps on the used market.


A P3X Fury with XM tailcap & SR07 tape switch on a Geissele MK4 rail

 

 

Tape switches on handgun lights

If you want to mount a handgun light such as the X300U-B, XH30 or XH35 on a rifle or PCC, the XT07 tailcap will allow you to run your choice of tape switch. This comes with a replacement battery hood door that has a plug for a tape switch (SR07 included). It also has the normal activation paddles as well as a lockout toggle switch to prevent accidental activation during storage or transport.



The XT07 includes the SR07 tape switch.

 

 

While we're on the topic of handgun tape switches, there are also DG switches for use on handguns. These will activate the light when the pistol is gripped.


 
The Surefire DG switch


 
 The DG switches are handgun specific but there's a good thread on Primary & Secondary that shows cross-compatibility.

 

 

 

Hopefully you found this article informative. If I can help with any questions, please feel free to email me at Ike@BigTexOutdoors.com



Older Post Newer Post